New LMSv2.1 / LMXv4.6 Control Software improvements:

- Ethernet control option in LMX 244
- USB driver installation not required for new LMX/LMS processors.
- Compatibility with old processors in the same way than before, searching the USB driver manually.
- Automatic connection to any LMX/LMS processor: manual re-connection not required when you change to another processor.


Pay attention to the location of the saved files. If you saved your LMX/LMS preset files in your old software directory 
(per example: \Program Files\RAM Audio\LMX-244 v4.5), we recommend to copy them in your new directory 
(per example: \Program Files\RAM Audio\LMX 244 v4.6) to use it in the same way than before.



Known problems: if you have a USB-Serial converter device installed in the computer, it is possible that you have to 
install the new software version compulsory to use a new LMX/LMS controller, otherwise the system can detect this 
processor as a USB-Serial converter. The best thing is to uninstall the USB-Serial converter drivers from the control 
panel and install the new LMX/LMS Control software. After that, you can install the USB-Serial converter drivers again 
if necessary.




(c) 2007 - CE Studio-2 sl - RAM Audio