|
|
|
|
Presentation
|
Download Operation Manual
|
|
|
|
RAM Audio® introduces this new generation of professional touring amplifiers based on the field proven QuantaPulse™ Technology. These new devices feature two or four channel models, ready for rough handling in the touring world. For this purpose, V Series amps implement oversized high efficiency regulated power supply with PFC front end to deliver their full performances independently of mains status. This together with oversized high efficiency audio power stage, forced front to back cooling through a component-free path with removable front panel dust filters, improved rugged mechanical design with even weight distribution, full digital control from LCD display on the front panel... Resulting in: just power, reliability and robustness for your touring gigs!
|
|
|
|
Features
|
|
|
|
• PFC QuantaPulse™ Regulated Dual SMPS |
|
• Digital Control with extra large LCD display user interface |
|
• Channel Temperature and Output Level Monitor in the LCD |
|
• USB port for firmware update and DSP control |
|
• 25 position Gain, Bridge mode, Input Links and ICL, front panel configurable |
|
• Digital Potentiometers with Encoder control |
|
• RAM Audio Power Management System |
|
• Hi Efficiency, Heavy Duty Audio Power section for extreme use |
|
• Easily removable front panel dust filters |
|
• Industry standard Neutrik® XLR and Speakon® connectors |
|
• Optional low latency 24bits 96kHz high performance DSP with post-DSP signal links and Ethernet control. It features up to 70 meters input delay |
|
• Optional EtheRAM II Ethernet monitor and control system |
|
• Optional EtherSound™ audio transport and AES/EBU Digital input |
|
• Efficient front to back cooling |
|
|
|
Protections
|
|
|
|
• ICL2™: improved Intelligent Clip Limiting |
|
• PMS™: Power Management System controls the amount of power that the amp delivers under
diferent circumstances. |
|
• SSP™: SOA Sentry Protection effectively limiting the power that the amp could deliver into an incorrect load or to a direct short-circuit |
|
• Faulty Channel Management (FCM™) |
|
• Soft-start, turn-on transients, Over-heating, DC, RF,
short-circuit |
|
• Overloaded power supply, Mains overvoltage |
|
|
|
Frequency Response (power bandwidth ±0.25dB):
20Hz-20kHz |
|
Phase Response (@1W 20Hz-20kHz): ±15deg |
|
Total Harmonic Distortion (20Hz-20kHz): <0.05% |
|
Intermodulation Distortion (SMPTE): <0.05% |
|
Damping Factor (20-500Hz @8ohm):>500 |
|
Crosstalk (20Hz-20kHz): >80dB |
|
Voltage Gain: 26dB to 38dB (0.5dB steps) |
|
Sensitivity (rated power 26/32/38dB Gain): 6000:
4/2/1 V 9000: 4.9/2.5/1.2
V 12000: 5.7/2.8/1.4
V
9004: 3.5/1.7/0.9 V 9044: 4.8/2.4/1.2 V
12004: 4.1/2/1 V 12044: 5.6/2.8/1.4 V |
|
Signal to noise Ratio (20Hz-20kHz): 6000:
113dB 9000: 115dB 12000:
116dB
9004: 112dB 9044: 115dB
12004: 113dB 12044: 116dB |
|
Required AC Mains
Operating Voltage (50Hz-60Hz): 170V-265V AC
Power On Idling (@230V): 0.5 A
1/8 rated power (@230V min. Z): 6000: 7 A 9000:
10 A 12000: 13 A 9004:
11 A 9044: 10 A 12004:
14A 12044: 13 A |
|
Dimensions (WxHxD): 483x88.9x460
mm - 19x3.5x18.1 inches |
|
Weight (Net): 6000: 10kg-22.1Lbs
9000/12000/9004/9044/12004/12044: 12kg-26.5Lbs |
|
Protections: Soft-start, Turn-on Turn-off transients, Muting at turn-on, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply, Mains Overvoltage, ICL™, PMS™, SSP™ and FCM™ |
|
|
|
Download Operation Manual
|
|
|
